Visible for testing\r\n */\r\nvar MAX_VALUE_MILLIS = 4 * 60 * 60 * 1000; // Four hours, like iOS and Android.\r\n/**\r\n * The percentage of backoff time to randomize by.\r\n * See\r\n * http://go/safe-client-behavior#step-1-determine-the-appropriate-retry-interval-to-handle-spike-traffic\r\n * for context.\r\n *\r\n *
Visible for testing\r\n */\r\nvar RANDOM_FACTOR = 0.5;\r\n/**\r\n * Based on the backoff method from\r\n * https://github.com/google/closure-library/blob/master/closure/goog/math/exponentialbackoff.js.\r\n * Extracted here so we don't need to pass metadata and a stateful ExponentialBackoff object around.\r\n */\r\nfunction calculateBackoffMillis(backoffCount, intervalMillis, backoffFactor) {\r\n if (intervalMillis === void 0) { intervalMillis = DEFAULT_INTERVAL_MILLIS; }\r\n if (backoffFactor === void 0) { backoffFactor = DEFAULT_BACKOFF_FACTOR; }\r\n // Calculates an exponentially increasing value.\r\n // Deviation: calculates value from count and a constant interval, so we only need to save value\r\n // and count to restore state.\r\n var currBaseValue = intervalMillis * Math.pow(backoffFactor, backoffCount);\r\n // A random \"fuzz\" to avoid waves of retries.\r\n // Deviation: randomFactor is required.\r\n var randomWait = Math.round(\r\n // A fraction of the backoff value to add/subtract.\r\n // Deviation: changes multiplication order to improve readability.\r\n RANDOM_FACTOR *\r\n currBaseValue *\r\n // A random float (rounded to int by Math.round above) in the range [-1, 1]. Determines\r\n // if we add or subtract.\r\n (Math.random() - 0.5) *\r\n 2);\r\n // Limits backoff to max to avoid effectively permanent backoff.\r\n return Math.min(MAX_VALUE_MILLIS, currBaseValue + randomWait);\r\n}\n\n/**\r\n * @license\r\n * Copyright 2020 Google LLC\r\n *\r\n * Licensed under the Apache License, Version 2.0 (the \"License\");\r\n * you may not use this file except in compliance with the License.\r\n * You may obtain a copy of the License at\r\n *\r\n * http://www.apache.org/licenses/LICENSE-2.0\r\n *\r\n * Unless required by applicable law or agreed to in writing, software\r\n * distributed under the License is distributed on an \"AS IS\" BASIS,\r\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r\n * See the License for the specific language governing permissions and\r\n * limitations under the License.\r\n */\r\n/**\r\n * Provide English ordinal letters after a number\r\n */\r\nfunction ordinal(i) {\r\n if (!Number.isFinite(i)) {\r\n return \"\" + i;\r\n }\r\n return i + indicator(i);\r\n}\r\nfunction indicator(i) {\r\n i = Math.abs(i);\r\n var cent = i % 100;\r\n if (cent >= 10 && cent <= 20) {\r\n return 'th';\r\n }\r\n var dec = i % 10;\r\n if (dec === 1) {\r\n return 'st';\r\n }\r\n if (dec === 2) {\r\n return 'nd';\r\n }\r\n if (dec === 3) {\r\n return 'rd';\r\n }\r\n return 'th';\r\n}\n\n/**\r\n * @license\r\n * Copyright 2021 Google LLC\r\n *\r\n * Licensed under the Apache License, Version 2.0 (the \"License\");\r\n * you may not use this file except in compliance with the License.\r\n * You may obtain a copy of the License at\r\n *\r\n * http://www.apache.org/licenses/LICENSE-2.0\r\n *\r\n * Unless required by applicable law or agreed to in writing, software\r\n * distributed under the License is distributed on an \"AS IS\" BASIS,\r\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r\n * See the License for the specific language governing permissions and\r\n * limitations under the License.\r\n */\r\nfunction getModularInstance(service) {\r\n if (service && service._delegate) {\r\n return service._delegate;\r\n }\r\n else {\r\n return service;\r\n }\r\n}\n\nexport { CONSTANTS, Deferred, ErrorFactory, FirebaseError, MAX_VALUE_MILLIS, RANDOM_FACTOR, Sha1, areCookiesEnabled, assert, assertionError, async, base64, base64Decode, base64Encode, base64urlEncodeWithoutPadding, calculateBackoffMillis, contains, createMockUserToken, createSubscribe, decode, deepCopy, deepEqual, deepExtend, errorPrefix, extractQuerystring, getGlobal, getModularInstance, getUA, isAdmin, isBrowser, isBrowserExtension, isElectron, isEmpty, isIE, isIndexedDBAvailable, isMobileCordova, isNode, isNodeSdk, isReactNative, isSafari, isUWP, isValidFormat, isValidTimestamp, issuedAtTime, jsonEval, map, ordinal, querystring, querystringDecode, safeGet, stringLength, stringToByteArray, stringify, validateArgCount, validateCallback, validateContextObject, validateIndexedDBOpenable, validateNamespace };\n//# sourceMappingURL=index.esm.js.map\n","\"use strict\";\n\nvar window = require('global/window');\n\nvar httpResponseHandler = function httpResponseHandler(callback, decodeResponseBody) {\n if (decodeResponseBody === void 0) {\n decodeResponseBody = false;\n }\n\n return function (err, response, responseBody) {\n // if the XHR failed, return that error\n if (err) {\n callback(err);\n return;\n } // if the HTTP status code is 4xx or 5xx, the request also failed\n\n\n if (response.statusCode >= 400 && response.statusCode <= 599) {\n var cause = responseBody;\n\n if (decodeResponseBody) {\n if (window.TextDecoder) {\n var charset = getCharset(response.headers && response.headers['content-type']);\n\n try {\n cause = new TextDecoder(charset).decode(responseBody);\n } catch (e) {}\n } else {\n cause = String.fromCharCode.apply(null, new Uint8Array(responseBody));\n }\n }\n\n callback({\n cause: cause\n });\n return;\n } // otherwise, request succeeded\n\n\n callback(null, responseBody);\n };\n};\n\nfunction getCharset(contentTypeHeader) {\n if (contentTypeHeader === void 0) {\n contentTypeHeader = '';\n }\n\n return contentTypeHeader.toLowerCase().split(';').reduce(function (charset, contentType) {\n var _contentType$split = contentType.split('='),\n type = _contentType$split[0],\n value = _contentType$split[1];\n\n if (type.trim() === 'charset') {\n return value.trim();\n }\n\n return charset;\n }, 'utf-8');\n}\n\nmodule.exports = httpResponseHandler;","\"use strict\";\n\nvar window = require(\"global/window\");\n\nvar _extends = require(\"@babel/runtime/helpers/extends\");\n\nvar isFunction = require('is-function');\n\ncreateXHR.httpHandler = require('./http-handler.js');\n/**\n * @license\n * slighly modified parse-headers 2.0.2
\n * Prefer `scheduleUpdate` over `update` because of performance reasons.\n * @method\n * @memberof Popper\n */\nfunction update() {\n // if popper is destroyed, don't perform any further update\n if (this.state.isDestroyed) {\n return;\n }\n\n var data = {\n instance: this,\n styles: {},\n arrowStyles: {},\n attributes: {},\n flipped: false,\n offsets: {}\n };\n\n // compute reference element offsets\n data.offsets.reference = getReferenceOffsets(this.state, this.popper, this.reference, this.options.positionFixed);\n\n // compute auto placement, store placement inside the data object,\n // modifiers will be able to edit `placement` if needed\n // and refer to originalPlacement to know the original value\n data.placement = computeAutoPlacement(this.options.placement, data.offsets.reference, this.popper, this.reference, this.options.modifiers.flip.boundariesElement, this.options.modifiers.flip.padding);\n\n // store the computed placement inside `originalPlacement`\n data.originalPlacement = data.placement;\n\n data.positionFixed = this.options.positionFixed;\n\n // compute the popper offsets\n data.offsets.popper = getPopperOffsets(this.popper, data.offsets.reference, data.placement);\n\n data.offsets.popper.position = this.options.positionFixed ? 'fixed' : 'absolute';\n\n // run the modifiers\n data = runModifiers(this.modifiers, data);\n\n // the first `update` will call `onCreate` callback\n // the other ones will call `onUpdate` callback\n if (!this.state.isCreated) {\n this.state.isCreated = true;\n this.options.onCreate(data);\n } else {\n this.options.onUpdate(data);\n }\n}\n\n/**\n * Helper used to know if the given modifier is enabled.\n * @method\n * @memberof Popper.Utils\n * @returns {Boolean}\n */\nfunction isModifierEnabled(modifiers, modifierName) {\n return modifiers.some(function (_ref) {\n var name = _ref.name,\n enabled = _ref.enabled;\n return enabled && name === modifierName;\n });\n}\n\n/**\n * Get the prefixed supported property name\n * @method\n * @memberof Popper.Utils\n * @argument {String} property (camelCase)\n * @returns {String} prefixed property (camelCase or PascalCase, depending on the vendor prefix)\n */\nfunction getSupportedPropertyName(property) {\n var prefixes = [false, 'ms', 'Webkit', 'Moz', 'O'];\n var upperProp = property.charAt(0).toUpperCase() + property.slice(1);\n\n for (var i = 0; i < prefixes.length; i++) {\n var prefix = prefixes[i];\n var toCheck = prefix ? '' + prefix + upperProp : property;\n if (typeof document.body.style[toCheck] !== 'undefined') {\n return toCheck;\n }\n }\n return null;\n}\n\n/**\n * Destroys the popper.\n * @method\n * @memberof Popper\n */\nfunction destroy() {\n this.state.isDestroyed = true;\n\n // touch DOM only if `applyStyle` modifier is enabled\n if (isModifierEnabled(this.modifiers, 'applyStyle')) {\n this.popper.removeAttribute('x-placement');\n this.popper.style.position = '';\n this.popper.style.top = '';\n this.popper.style.left = '';\n this.popper.style.right = '';\n this.popper.style.bottom = '';\n this.popper.style.willChange = '';\n this.popper.style[getSupportedPropertyName('transform')] = '';\n }\n\n this.disableEventListeners();\n\n // remove the popper if user explicitly asked for the deletion on destroy\n // do not use `remove` because IE11 doesn't support it\n if (this.options.removeOnDestroy) {\n this.popper.parentNode.removeChild(this.popper);\n }\n return this;\n}\n\n/**\n * Get the window associated with the element\n * @argument {Element} element\n * @returns {Window}\n */\nfunction getWindow(element) {\n var ownerDocument = element.ownerDocument;\n return ownerDocument ? ownerDocument.defaultView : window;\n}\n\nfunction attachToScrollParents(scrollParent, event, callback, scrollParents) {\n var isBody = scrollParent.nodeName === 'BODY';\n var target = isBody ? scrollParent.ownerDocument.defaultView : scrollParent;\n target.addEventListener(event, callback, { passive: true });\n\n if (!isBody) {\n attachToScrollParents(getScrollParent(target.parentNode), event, callback, scrollParents);\n }\n scrollParents.push(target);\n}\n\n/**\n * Setup needed event listeners used to update the popper position\n * @method\n * @memberof Popper.Utils\n * @private\n */\nfunction setupEventListeners(reference, options, state, updateBound) {\n // Resize event listener on window\n state.updateBound = updateBound;\n getWindow(reference).addEventListener('resize', state.updateBound, { passive: true });\n\n // Scroll event listener on scroll parents\n var scrollElement = getScrollParent(reference);\n attachToScrollParents(scrollElement, 'scroll', state.updateBound, state.scrollParents);\n state.scrollElement = scrollElement;\n state.eventsEnabled = true;\n\n return state;\n}\n\n/**\n * It will add resize/scroll events and start recalculating\n * position of the popper element when they are triggered.\n * @method\n * @memberof Popper\n */\nfunction enableEventListeners() {\n if (!this.state.eventsEnabled) {\n this.state = setupEventListeners(this.reference, this.options, this.state, this.scheduleUpdate);\n }\n}\n\n/**\n * Remove event listeners used to update the popper position\n * @method\n * @memberof Popper.Utils\n * @private\n */\nfunction removeEventListeners(reference, state) {\n // Remove resize event listener on window\n getWindow(reference).removeEventListener('resize', state.updateBound);\n\n // Remove scroll event listener on scroll parents\n state.scrollParents.forEach(function (target) {\n target.removeEventListener('scroll', state.updateBound);\n });\n\n // Reset state\n state.updateBound = null;\n state.scrollParents = [];\n state.scrollElement = null;\n state.eventsEnabled = false;\n return state;\n}\n\n/**\n * It will remove resize/scroll events and won't recalculate popper position\n * when they are triggered. It also won't trigger `onUpdate` callback anymore,\n * unless you call `update` method manually.\n * @method\n * @memberof Popper\n */\nfunction disableEventListeners() {\n if (this.state.eventsEnabled) {\n cancelAnimationFrame(this.scheduleUpdate);\n this.state = removeEventListeners(this.reference, this.state);\n }\n}\n\n/**\n * Tells if a given input is a number\n * @method\n * @memberof Popper.Utils\n * @param {*} input to check\n * @return {Boolean}\n */\nfunction isNumeric(n) {\n return n !== '' && !isNaN(parseFloat(n)) && isFinite(n);\n}\n\n/**\n * Set the style to the given popper\n * @method\n * @memberof Popper.Utils\n * @argument {Element} element - Element to apply the style to\n * @argument {Object} styles\n * Object with a list of properties and values which will be applied to the element\n */\nfunction setStyles(element, styles) {\n Object.keys(styles).forEach(function (prop) {\n var unit = '';\n // add unit if the value is numeric and is one of the following\n if (['width', 'height', 'top', 'right', 'bottom', 'left'].indexOf(prop) !== -1 && isNumeric(styles[prop])) {\n unit = 'px';\n }\n element.style[prop] = styles[prop] + unit;\n });\n}\n\n/**\n * Set the attributes to the given popper\n * @method\n * @memberof Popper.Utils\n * @argument {Element} element - Element to apply the attributes to\n * @argument {Object} styles\n * Object with a list of properties and values which will be applied to the element\n */\nfunction setAttributes(element, attributes) {\n Object.keys(attributes).forEach(function (prop) {\n var value = attributes[prop];\n if (value !== false) {\n element.setAttribute(prop, attributes[prop]);\n } else {\n element.removeAttribute(prop);\n }\n });\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by `update` method\n * @argument {Object} data.styles - List of style properties - values to apply to popper element\n * @argument {Object} data.attributes - List of attribute properties - values to apply to popper element\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The same data object\n */\nfunction applyStyle(data) {\n // any property present in `data.styles` will be applied to the popper,\n // in this way we can make the 3rd party modifiers add custom styles to it\n // Be aware, modifiers could override the properties defined in the previous\n // lines of this modifier!\n setStyles(data.instance.popper, data.styles);\n\n // any property present in `data.attributes` will be applied to the popper,\n // they will be set as HTML attributes of the element\n setAttributes(data.instance.popper, data.attributes);\n\n // if arrowElement is defined and arrowStyles has some properties\n if (data.arrowElement && Object.keys(data.arrowStyles).length) {\n setStyles(data.arrowElement, data.arrowStyles);\n }\n\n return data;\n}\n\n/**\n * Set the x-placement attribute before everything else because it could be used\n * to add margins to the popper margins needs to be calculated to get the\n * correct popper offsets.\n * @method\n * @memberof Popper.modifiers\n * @param {HTMLElement} reference - The reference element used to position the popper\n * @param {HTMLElement} popper - The HTML element used as popper\n * @param {Object} options - Popper.js options\n */\nfunction applyStyleOnLoad(reference, popper, options, modifierOptions, state) {\n // compute reference element offsets\n var referenceOffsets = getReferenceOffsets(state, popper, reference, options.positionFixed);\n\n // compute auto placement, store placement inside the data object,\n // modifiers will be able to edit `placement` if needed\n // and refer to originalPlacement to know the original value\n var placement = computeAutoPlacement(options.placement, referenceOffsets, popper, reference, options.modifiers.flip.boundariesElement, options.modifiers.flip.padding);\n\n popper.setAttribute('x-placement', placement);\n\n // Apply `position` to popper before anything else because\n // without the position applied we can't guarantee correct computations\n setStyles(popper, { position: options.positionFixed ? 'fixed' : 'absolute' });\n\n return options;\n}\n\n/**\n * @function\n * @memberof Popper.Utils\n * @argument {Object} data - The data object generated by `update` method\n * @argument {Boolean} shouldRound - If the offsets should be rounded at all\n * @returns {Object} The popper's position offsets rounded\n *\n * The tale of pixel-perfect positioning. It's still not 100% perfect, but as\n * good as it can be within reason.\n * Discussion here: https://github.com/FezVrasta/popper.js/pull/715\n *\n * Low DPI screens cause a popper to be blurry if not using full pixels (Safari\n * as well on High DPI screens).\n *\n * Firefox prefers no rounding for positioning and does not have blurriness on\n * high DPI screens.\n *\n * Only horizontal placement and left/right values need to be considered.\n */\nfunction getRoundedOffsets(data, shouldRound) {\n var _data$offsets = data.offsets,\n popper = _data$offsets.popper,\n reference = _data$offsets.reference;\n var round = Math.round,\n floor = Math.floor;\n\n var noRound = function noRound(v) {\n return v;\n };\n\n var referenceWidth = round(reference.width);\n var popperWidth = round(popper.width);\n\n var isVertical = ['left', 'right'].indexOf(data.placement) !== -1;\n var isVariation = data.placement.indexOf('-') !== -1;\n var sameWidthParity = referenceWidth % 2 === popperWidth % 2;\n var bothOddWidth = referenceWidth % 2 === 1 && popperWidth % 2 === 1;\n\n var horizontalToInteger = !shouldRound ? noRound : isVertical || isVariation || sameWidthParity ? round : floor;\n var verticalToInteger = !shouldRound ? noRound : round;\n\n return {\n left: horizontalToInteger(bothOddWidth && !isVariation && shouldRound ? popper.left - 1 : popper.left),\n top: verticalToInteger(popper.top),\n bottom: verticalToInteger(popper.bottom),\n right: horizontalToInteger(popper.right)\n };\n}\n\nvar isFirefox = isBrowser && /Firefox/i.test(navigator.userAgent);\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by `update` method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction computeStyle(data, options) {\n var x = options.x,\n y = options.y;\n var popper = data.offsets.popper;\n\n // Remove this legacy support in Popper.js v2\n\n var legacyGpuAccelerationOption = find(data.instance.modifiers, function (modifier) {\n return modifier.name === 'applyStyle';\n }).gpuAcceleration;\n if (legacyGpuAccelerationOption !== undefined) {\n console.warn('WARNING: `gpuAcceleration` option moved to `computeStyle` modifier and will not be supported in future versions of Popper.js!');\n }\n var gpuAcceleration = legacyGpuAccelerationOption !== undefined ? legacyGpuAccelerationOption : options.gpuAcceleration;\n\n var offsetParent = getOffsetParent(data.instance.popper);\n var offsetParentRect = getBoundingClientRect(offsetParent);\n\n // Styles\n var styles = {\n position: popper.position\n };\n\n var offsets = getRoundedOffsets(data, window.devicePixelRatio < 2 || !isFirefox);\n\n var sideA = x === 'bottom' ? 'top' : 'bottom';\n var sideB = y === 'right' ? 'left' : 'right';\n\n // if gpuAcceleration is set to `true` and transform is supported,\n // we use `translate3d` to apply the position to the popper we\n // automatically use the supported prefixed version if needed\n var prefixedProperty = getSupportedPropertyName('transform');\n\n // now, let's make a step back and look at this code closely (wtf?)\n // If the content of the popper grows once it's been positioned, it\n // may happen that the popper gets misplaced because of the new content\n // overflowing its reference element\n // To avoid this problem, we provide two options (x and y), which allow\n // the consumer to define the offset origin.\n // If we position a popper on top of a reference element, we can set\n // `x` to `top` to make the popper grow towards its top instead of\n // its bottom.\n var left = void 0,\n top = void 0;\n if (sideA === 'bottom') {\n // when offsetParent is the positioning is relative to the bottom of the screen (excluding the scrollbar)\n // and not the bottom of the html element\n if (offsetParent.nodeName === 'HTML') {\n top = -offsetParent.clientHeight + offsets.bottom;\n } else {\n top = -offsetParentRect.height + offsets.bottom;\n }\n } else {\n top = offsets.top;\n }\n if (sideB === 'right') {\n if (offsetParent.nodeName === 'HTML') {\n left = -offsetParent.clientWidth + offsets.right;\n } else {\n left = -offsetParentRect.width + offsets.right;\n }\n } else {\n left = offsets.left;\n }\n if (gpuAcceleration && prefixedProperty) {\n styles[prefixedProperty] = 'translate3d(' + left + 'px, ' + top + 'px, 0)';\n styles[sideA] = 0;\n styles[sideB] = 0;\n styles.willChange = 'transform';\n } else {\n // othwerise, we use the standard `top`, `left`, `bottom` and `right` properties\n var invertTop = sideA === 'bottom' ? -1 : 1;\n var invertLeft = sideB === 'right' ? -1 : 1;\n styles[sideA] = top * invertTop;\n styles[sideB] = left * invertLeft;\n styles.willChange = sideA + ', ' + sideB;\n }\n\n // Attributes\n var attributes = {\n 'x-placement': data.placement\n };\n\n // Update `data` attributes, styles and arrowStyles\n data.attributes = _extends({}, attributes, data.attributes);\n data.styles = _extends({}, styles, data.styles);\n data.arrowStyles = _extends({}, data.offsets.arrow, data.arrowStyles);\n\n return data;\n}\n\n/**\n * Helper used to know if the given modifier depends from another one.
\n * It checks if the needed modifier is listed and enabled.\n * @method\n * @memberof Popper.Utils\n * @param {Array} modifiers - list of modifiers\n * @param {String} requestingName - name of requesting modifier\n * @param {String} requestedName - name of requested modifier\n * @returns {Boolean}\n */\nfunction isModifierRequired(modifiers, requestingName, requestedName) {\n var requesting = find(modifiers, function (_ref) {\n var name = _ref.name;\n return name === requestingName;\n });\n\n var isRequired = !!requesting && modifiers.some(function (modifier) {\n return modifier.name === requestedName && modifier.enabled && modifier.order < requesting.order;\n });\n\n if (!isRequired) {\n var _requesting = '`' + requestingName + '`';\n var requested = '`' + requestedName + '`';\n console.warn(requested + ' modifier is required by ' + _requesting + ' modifier in order to work, be sure to include it before ' + _requesting + '!');\n }\n return isRequired;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by update method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction arrow(data, options) {\n var _data$offsets$arrow;\n\n // arrow depends on keepTogether in order to work\n if (!isModifierRequired(data.instance.modifiers, 'arrow', 'keepTogether')) {\n return data;\n }\n\n var arrowElement = options.element;\n\n // if arrowElement is a string, suppose it's a CSS selector\n if (typeof arrowElement === 'string') {\n arrowElement = data.instance.popper.querySelector(arrowElement);\n\n // if arrowElement is not found, don't run the modifier\n if (!arrowElement) {\n return data;\n }\n } else {\n // if the arrowElement isn't a query selector we must check that the\n // provided DOM node is child of its popper node\n if (!data.instance.popper.contains(arrowElement)) {\n console.warn('WARNING: `arrow.element` must be child of its popper element!');\n return data;\n }\n }\n\n var placement = data.placement.split('-')[0];\n var _data$offsets = data.offsets,\n popper = _data$offsets.popper,\n reference = _data$offsets.reference;\n\n var isVertical = ['left', 'right'].indexOf(placement) !== -1;\n\n var len = isVertical ? 'height' : 'width';\n var sideCapitalized = isVertical ? 'Top' : 'Left';\n var side = sideCapitalized.toLowerCase();\n var altSide = isVertical ? 'left' : 'top';\n var opSide = isVertical ? 'bottom' : 'right';\n var arrowElementSize = getOuterSizes(arrowElement)[len];\n\n //\n // extends keepTogether behavior making sure the popper and its\n // reference have enough pixels in conjunction\n //\n\n // top/left side\n if (reference[opSide] - arrowElementSize < popper[side]) {\n data.offsets.popper[side] -= popper[side] - (reference[opSide] - arrowElementSize);\n }\n // bottom/right side\n if (reference[side] + arrowElementSize > popper[opSide]) {\n data.offsets.popper[side] += reference[side] + arrowElementSize - popper[opSide];\n }\n data.offsets.popper = getClientRect(data.offsets.popper);\n\n // compute center of the popper\n var center = reference[side] + reference[len] / 2 - arrowElementSize / 2;\n\n // Compute the sideValue using the updated popper offsets\n // take popper margin in account because we don't have this info available\n var css = getStyleComputedProperty(data.instance.popper);\n var popperMarginSide = parseFloat(css['margin' + sideCapitalized]);\n var popperBorderSide = parseFloat(css['border' + sideCapitalized + 'Width']);\n var sideValue = center - data.offsets.popper[side] - popperMarginSide - popperBorderSide;\n\n // prevent arrowElement from being placed not contiguously to its popper\n sideValue = Math.max(Math.min(popper[len] - arrowElementSize, sideValue), 0);\n\n data.arrowElement = arrowElement;\n data.offsets.arrow = (_data$offsets$arrow = {}, defineProperty(_data$offsets$arrow, side, Math.round(sideValue)), defineProperty(_data$offsets$arrow, altSide, ''), _data$offsets$arrow);\n\n return data;\n}\n\n/**\n * Get the opposite placement variation of the given one\n * @method\n * @memberof Popper.Utils\n * @argument {String} placement variation\n * @returns {String} flipped placement variation\n */\nfunction getOppositeVariation(variation) {\n if (variation === 'end') {\n return 'start';\n } else if (variation === 'start') {\n return 'end';\n }\n return variation;\n}\n\n/**\n * List of accepted placements to use as values of the `placement` option.
\n * Valid placements are:\n * - `auto`\n * - `top`\n * - `right`\n * - `bottom`\n * - `left`\n *\n * Each placement can have a variation from this list:\n * - `-start`\n * - `-end`\n *\n * Variations are interpreted easily if you think of them as the left to right\n * written languages. Horizontally (`top` and `bottom`), `start` is left and `end`\n * is right.
\n * Vertically (`left` and `right`), `start` is top and `end` is bottom.\n *\n * Some valid examples are:\n * - `top-end` (on top of reference, right aligned)\n * - `right-start` (on right of reference, top aligned)\n * - `bottom` (on bottom, centered)\n * - `auto-end` (on the side with more space available, alignment depends by placement)\n *\n * @static\n * @type {Array}\n * @enum {String}\n * @readonly\n * @method placements\n * @memberof Popper\n */\nvar placements = ['auto-start', 'auto', 'auto-end', 'top-start', 'top', 'top-end', 'right-start', 'right', 'right-end', 'bottom-end', 'bottom', 'bottom-start', 'left-end', 'left', 'left-start'];\n\n// Get rid of `auto` `auto-start` and `auto-end`\nvar validPlacements = placements.slice(3);\n\n/**\n * Given an initial placement, returns all the subsequent placements\n * clockwise (or counter-clockwise).\n *\n * @method\n * @memberof Popper.Utils\n * @argument {String} placement - A valid placement (it accepts variations)\n * @argument {Boolean} counter - Set to true to walk the placements counterclockwise\n * @returns {Array} placements including their variations\n */\nfunction clockwise(placement) {\n var counter = arguments.length > 1 && arguments[1] !== undefined ? arguments[1] : false;\n\n var index = validPlacements.indexOf(placement);\n var arr = validPlacements.slice(index + 1).concat(validPlacements.slice(0, index));\n return counter ? arr.reverse() : arr;\n}\n\nvar BEHAVIORS = {\n FLIP: 'flip',\n CLOCKWISE: 'clockwise',\n COUNTERCLOCKWISE: 'counterclockwise'\n};\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by update method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction flip(data, options) {\n // if `inner` modifier is enabled, we can't use the `flip` modifier\n if (isModifierEnabled(data.instance.modifiers, 'inner')) {\n return data;\n }\n\n if (data.flipped && data.placement === data.originalPlacement) {\n // seems like flip is trying to loop, probably there's not enough space on any of the flippable sides\n return data;\n }\n\n var boundaries = getBoundaries(data.instance.popper, data.instance.reference, options.padding, options.boundariesElement, data.positionFixed);\n\n var placement = data.placement.split('-')[0];\n var placementOpposite = getOppositePlacement(placement);\n var variation = data.placement.split('-')[1] || '';\n\n var flipOrder = [];\n\n switch (options.behavior) {\n case BEHAVIORS.FLIP:\n flipOrder = [placement, placementOpposite];\n break;\n case BEHAVIORS.CLOCKWISE:\n flipOrder = clockwise(placement);\n break;\n case BEHAVIORS.COUNTERCLOCKWISE:\n flipOrder = clockwise(placement, true);\n break;\n default:\n flipOrder = options.behavior;\n }\n\n flipOrder.forEach(function (step, index) {\n if (placement !== step || flipOrder.length === index + 1) {\n return data;\n }\n\n placement = data.placement.split('-')[0];\n placementOpposite = getOppositePlacement(placement);\n\n var popperOffsets = data.offsets.popper;\n var refOffsets = data.offsets.reference;\n\n // using floor because the reference offsets may contain decimals we are not going to consider here\n var floor = Math.floor;\n var overlapsRef = placement === 'left' && floor(popperOffsets.right) > floor(refOffsets.left) || placement === 'right' && floor(popperOffsets.left) < floor(refOffsets.right) || placement === 'top' && floor(popperOffsets.bottom) > floor(refOffsets.top) || placement === 'bottom' && floor(popperOffsets.top) < floor(refOffsets.bottom);\n\n var overflowsLeft = floor(popperOffsets.left) < floor(boundaries.left);\n var overflowsRight = floor(popperOffsets.right) > floor(boundaries.right);\n var overflowsTop = floor(popperOffsets.top) < floor(boundaries.top);\n var overflowsBottom = floor(popperOffsets.bottom) > floor(boundaries.bottom);\n\n var overflowsBoundaries = placement === 'left' && overflowsLeft || placement === 'right' && overflowsRight || placement === 'top' && overflowsTop || placement === 'bottom' && overflowsBottom;\n\n // flip the variation if required\n var isVertical = ['top', 'bottom'].indexOf(placement) !== -1;\n\n // flips variation if reference element overflows boundaries\n var flippedVariationByRef = !!options.flipVariations && (isVertical && variation === 'start' && overflowsLeft || isVertical && variation === 'end' && overflowsRight || !isVertical && variation === 'start' && overflowsTop || !isVertical && variation === 'end' && overflowsBottom);\n\n // flips variation if popper content overflows boundaries\n var flippedVariationByContent = !!options.flipVariationsByContent && (isVertical && variation === 'start' && overflowsRight || isVertical && variation === 'end' && overflowsLeft || !isVertical && variation === 'start' && overflowsBottom || !isVertical && variation === 'end' && overflowsTop);\n\n var flippedVariation = flippedVariationByRef || flippedVariationByContent;\n\n if (overlapsRef || overflowsBoundaries || flippedVariation) {\n // this boolean to detect any flip loop\n data.flipped = true;\n\n if (overlapsRef || overflowsBoundaries) {\n placement = flipOrder[index + 1];\n }\n\n if (flippedVariation) {\n variation = getOppositeVariation(variation);\n }\n\n data.placement = placement + (variation ? '-' + variation : '');\n\n // this object contains `position`, we want to preserve it along with\n // any additional property we may add in the future\n data.offsets.popper = _extends({}, data.offsets.popper, getPopperOffsets(data.instance.popper, data.offsets.reference, data.placement));\n\n data = runModifiers(data.instance.modifiers, data, 'flip');\n }\n });\n return data;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by update method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction keepTogether(data) {\n var _data$offsets = data.offsets,\n popper = _data$offsets.popper,\n reference = _data$offsets.reference;\n\n var placement = data.placement.split('-')[0];\n var floor = Math.floor;\n var isVertical = ['top', 'bottom'].indexOf(placement) !== -1;\n var side = isVertical ? 'right' : 'bottom';\n var opSide = isVertical ? 'left' : 'top';\n var measurement = isVertical ? 'width' : 'height';\n\n if (popper[side] < floor(reference[opSide])) {\n data.offsets.popper[opSide] = floor(reference[opSide]) - popper[measurement];\n }\n if (popper[opSide] > floor(reference[side])) {\n data.offsets.popper[opSide] = floor(reference[side]);\n }\n\n return data;\n}\n\n/**\n * Converts a string containing value + unit into a px value number\n * @function\n * @memberof {modifiers~offset}\n * @private\n * @argument {String} str - Value + unit string\n * @argument {String} measurement - `height` or `width`\n * @argument {Object} popperOffsets\n * @argument {Object} referenceOffsets\n * @returns {Number|String}\n * Value in pixels, or original string if no values were extracted\n */\nfunction toValue(str, measurement, popperOffsets, referenceOffsets) {\n // separate value from unit\n var split = str.match(/((?:\\-|\\+)?\\d*\\.?\\d*)(.*)/);\n var value = +split[1];\n var unit = split[2];\n\n // If it's not a number it's an operator, I guess\n if (!value) {\n return str;\n }\n\n if (unit.indexOf('%') === 0) {\n var element = void 0;\n switch (unit) {\n case '%p':\n element = popperOffsets;\n break;\n case '%':\n case '%r':\n default:\n element = referenceOffsets;\n }\n\n var rect = getClientRect(element);\n return rect[measurement] / 100 * value;\n } else if (unit === 'vh' || unit === 'vw') {\n // if is a vh or vw, we calculate the size based on the viewport\n var size = void 0;\n if (unit === 'vh') {\n size = Math.max(document.documentElement.clientHeight, window.innerHeight || 0);\n } else {\n size = Math.max(document.documentElement.clientWidth, window.innerWidth || 0);\n }\n return size / 100 * value;\n } else {\n // if is an explicit pixel unit, we get rid of the unit and keep the value\n // if is an implicit unit, it's px, and we return just the value\n return value;\n }\n}\n\n/**\n * Parse an `offset` string to extrapolate `x` and `y` numeric offsets.\n * @function\n * @memberof {modifiers~offset}\n * @private\n * @argument {String} offset\n * @argument {Object} popperOffsets\n * @argument {Object} referenceOffsets\n * @argument {String} basePlacement\n * @returns {Array} a two cells array with x and y offsets in numbers\n */\nfunction parseOffset(offset, popperOffsets, referenceOffsets, basePlacement) {\n var offsets = [0, 0];\n\n // Use height if placement is left or right and index is 0 otherwise use width\n // in this way the first offset will use an axis and the second one\n // will use the other one\n var useHeight = ['right', 'left'].indexOf(basePlacement) !== -1;\n\n // Split the offset string to obtain a list of values and operands\n // The regex addresses values with the plus or minus sign in front (+10, -20, etc)\n var fragments = offset.split(/(\\+|\\-)/).map(function (frag) {\n return frag.trim();\n });\n\n // Detect if the offset string contains a pair of values or a single one\n // they could be separated by comma or space\n var divider = fragments.indexOf(find(fragments, function (frag) {\n return frag.search(/,|\\s/) !== -1;\n }));\n\n if (fragments[divider] && fragments[divider].indexOf(',') === -1) {\n console.warn('Offsets separated by white space(s) are deprecated, use a comma (,) instead.');\n }\n\n // If divider is found, we divide the list of values and operands to divide\n // them by ofset X and Y.\n var splitRegex = /\\s*,\\s*|\\s+/;\n var ops = divider !== -1 ? [fragments.slice(0, divider).concat([fragments[divider].split(splitRegex)[0]]), [fragments[divider].split(splitRegex)[1]].concat(fragments.slice(divider + 1))] : [fragments];\n\n // Convert the values with units to absolute pixels to allow our computations\n ops = ops.map(function (op, index) {\n // Most of the units rely on the orientation of the popper\n var measurement = (index === 1 ? !useHeight : useHeight) ? 'height' : 'width';\n var mergeWithPrevious = false;\n return op\n // This aggregates any `+` or `-` sign that aren't considered operators\n // e.g.: 10 + +5 => [10, +, +5]\n .reduce(function (a, b) {\n if (a[a.length - 1] === '' && ['+', '-'].indexOf(b) !== -1) {\n a[a.length - 1] = b;\n mergeWithPrevious = true;\n return a;\n } else if (mergeWithPrevious) {\n a[a.length - 1] += b;\n mergeWithPrevious = false;\n return a;\n } else {\n return a.concat(b);\n }\n }, [])\n // Here we convert the string values into number values (in px)\n .map(function (str) {\n return toValue(str, measurement, popperOffsets, referenceOffsets);\n });\n });\n\n // Loop trough the offsets arrays and execute the operations\n ops.forEach(function (op, index) {\n op.forEach(function (frag, index2) {\n if (isNumeric(frag)) {\n offsets[index] += frag * (op[index2 - 1] === '-' ? -1 : 1);\n }\n });\n });\n return offsets;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by update method\n * @argument {Object} options - Modifiers configuration and options\n * @argument {Number|String} options.offset=0\n * The offset value as described in the modifier description\n * @returns {Object} The data object, properly modified\n */\nfunction offset(data, _ref) {\n var offset = _ref.offset;\n var placement = data.placement,\n _data$offsets = data.offsets,\n popper = _data$offsets.popper,\n reference = _data$offsets.reference;\n\n var basePlacement = placement.split('-')[0];\n\n var offsets = void 0;\n if (isNumeric(+offset)) {\n offsets = [+offset, 0];\n } else {\n offsets = parseOffset(offset, popper, reference, basePlacement);\n }\n\n if (basePlacement === 'left') {\n popper.top += offsets[0];\n popper.left -= offsets[1];\n } else if (basePlacement === 'right') {\n popper.top += offsets[0];\n popper.left += offsets[1];\n } else if (basePlacement === 'top') {\n popper.left += offsets[0];\n popper.top -= offsets[1];\n } else if (basePlacement === 'bottom') {\n popper.left += offsets[0];\n popper.top += offsets[1];\n }\n\n data.popper = popper;\n return data;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by `update` method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction preventOverflow(data, options) {\n var boundariesElement = options.boundariesElement || getOffsetParent(data.instance.popper);\n\n // If offsetParent is the reference element, we really want to\n // go one step up and use the next offsetParent as reference to\n // avoid to make this modifier completely useless and look like broken\n if (data.instance.reference === boundariesElement) {\n boundariesElement = getOffsetParent(boundariesElement);\n }\n\n // NOTE: DOM access here\n // resets the popper's position so that the document size can be calculated excluding\n // the size of the popper element itself\n var transformProp = getSupportedPropertyName('transform');\n var popperStyles = data.instance.popper.style; // assignment to help minification\n var top = popperStyles.top,\n left = popperStyles.left,\n transform = popperStyles[transformProp];\n\n popperStyles.top = '';\n popperStyles.left = '';\n popperStyles[transformProp] = '';\n\n var boundaries = getBoundaries(data.instance.popper, data.instance.reference, options.padding, boundariesElement, data.positionFixed);\n\n // NOTE: DOM access here\n // restores the original style properties after the offsets have been computed\n popperStyles.top = top;\n popperStyles.left = left;\n popperStyles[transformProp] = transform;\n\n options.boundaries = boundaries;\n\n var order = options.priority;\n var popper = data.offsets.popper;\n\n var check = {\n primary: function primary(placement) {\n var value = popper[placement];\n if (popper[placement] < boundaries[placement] && !options.escapeWithReference) {\n value = Math.max(popper[placement], boundaries[placement]);\n }\n return defineProperty({}, placement, value);\n },\n secondary: function secondary(placement) {\n var mainSide = placement === 'right' ? 'left' : 'top';\n var value = popper[mainSide];\n if (popper[placement] > boundaries[placement] && !options.escapeWithReference) {\n value = Math.min(popper[mainSide], boundaries[placement] - (placement === 'right' ? popper.width : popper.height));\n }\n return defineProperty({}, mainSide, value);\n }\n };\n\n order.forEach(function (placement) {\n var side = ['left', 'top'].indexOf(placement) !== -1 ? 'primary' : 'secondary';\n popper = _extends({}, popper, check[side](placement));\n });\n\n data.offsets.popper = popper;\n\n return data;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by `update` method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction shift(data) {\n var placement = data.placement;\n var basePlacement = placement.split('-')[0];\n var shiftvariation = placement.split('-')[1];\n\n // if shift shiftvariation is specified, run the modifier\n if (shiftvariation) {\n var _data$offsets = data.offsets,\n reference = _data$offsets.reference,\n popper = _data$offsets.popper;\n\n var isVertical = ['bottom', 'top'].indexOf(basePlacement) !== -1;\n var side = isVertical ? 'left' : 'top';\n var measurement = isVertical ? 'width' : 'height';\n\n var shiftOffsets = {\n start: defineProperty({}, side, reference[side]),\n end: defineProperty({}, side, reference[side] + reference[measurement] - popper[measurement])\n };\n\n data.offsets.popper = _extends({}, popper, shiftOffsets[shiftvariation]);\n }\n\n return data;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by update method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction hide(data) {\n if (!isModifierRequired(data.instance.modifiers, 'hide', 'preventOverflow')) {\n return data;\n }\n\n var refRect = data.offsets.reference;\n var bound = find(data.instance.modifiers, function (modifier) {\n return modifier.name === 'preventOverflow';\n }).boundaries;\n\n if (refRect.bottom < bound.top || refRect.left > bound.right || refRect.top > bound.bottom || refRect.right < bound.left) {\n // Avoid unnecessary DOM access if visibility hasn't changed\n if (data.hide === true) {\n return data;\n }\n\n data.hide = true;\n data.attributes['x-out-of-boundaries'] = '';\n } else {\n // Avoid unnecessary DOM access if visibility hasn't changed\n if (data.hide === false) {\n return data;\n }\n\n data.hide = false;\n data.attributes['x-out-of-boundaries'] = false;\n }\n\n return data;\n}\n\n/**\n * @function\n * @memberof Modifiers\n * @argument {Object} data - The data object generated by `update` method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {Object} The data object, properly modified\n */\nfunction inner(data) {\n var placement = data.placement;\n var basePlacement = placement.split('-')[0];\n var _data$offsets = data.offsets,\n popper = _data$offsets.popper,\n reference = _data$offsets.reference;\n\n var isHoriz = ['left', 'right'].indexOf(basePlacement) !== -1;\n\n var subtractLength = ['top', 'left'].indexOf(basePlacement) === -1;\n\n popper[isHoriz ? 'left' : 'top'] = reference[basePlacement] - (subtractLength ? popper[isHoriz ? 'width' : 'height'] : 0);\n\n data.placement = getOppositePlacement(placement);\n data.offsets.popper = getClientRect(popper);\n\n return data;\n}\n\n/**\n * Modifier function, each modifier can have a function of this type assigned\n * to its `fn` property.
\n * These functions will be called on each update, this means that you must\n * make sure they are performant enough to avoid performance bottlenecks.\n *\n * @function ModifierFn\n * @argument {dataObject} data - The data object generated by `update` method\n * @argument {Object} options - Modifiers configuration and options\n * @returns {dataObject} The data object, properly modified\n */\n\n/**\n * Modifiers are plugins used to alter the behavior of your poppers.
\n * Popper.js uses a set of 9 modifiers to provide all the basic functionalities\n * needed by the library.\n *\n * Usually you don't want to override the `order`, `fn` and `onLoad` props.\n * All the other properties are configurations that could be tweaked.\n * @namespace modifiers\n */\nvar modifiers = {\n /**\n * Modifier used to shift the popper on the start or end of its reference\n * element.
\n * It will read the variation of the `placement` property.
\n * It can be one either `-end` or `-start`.\n * @memberof modifiers\n * @inner\n */\n shift: {\n /** @prop {number} order=100 - Index used to define the order of execution */\n order: 100,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: shift\n },\n\n /**\n * The `offset` modifier can shift your popper on both its axis.\n *\n * It accepts the following units:\n * - `px` or unit-less, interpreted as pixels\n * - `%` or `%r`, percentage relative to the length of the reference element\n * - `%p`, percentage relative to the length of the popper element\n * - `vw`, CSS viewport width unit\n * - `vh`, CSS viewport height unit\n *\n * For length is intended the main axis relative to the placement of the popper.
\n * This means that if the placement is `top` or `bottom`, the length will be the\n * `width`. In case of `left` or `right`, it will be the `height`.\n *\n * You can provide a single value (as `Number` or `String`), or a pair of values\n * as `String` divided by a comma or one (or more) white spaces.
\n * The latter is a deprecated method because it leads to confusion and will be\n * removed in v2.
\n * Additionally, it accepts additions and subtractions between different units.\n * Note that multiplications and divisions aren't supported.\n *\n * Valid examples are:\n * ```\n * 10\n * '10%'\n * '10, 10'\n * '10%, 10'\n * '10 + 10%'\n * '10 - 5vh + 3%'\n * '-10px + 5vh, 5px - 6%'\n * ```\n * > **NB**: If you desire to apply offsets to your poppers in a way that may make them overlap\n * > with their reference element, unfortunately, you will have to disable the `flip` modifier.\n * > You can read more on this at this [issue](https://github.com/FezVrasta/popper.js/issues/373).\n *\n * @memberof modifiers\n * @inner\n */\n offset: {\n /** @prop {number} order=200 - Index used to define the order of execution */\n order: 200,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: offset,\n /** @prop {Number|String} offset=0\n * The offset value as described in the modifier description\n */\n offset: 0\n },\n\n /**\n * Modifier used to prevent the popper from being positioned outside the boundary.\n *\n * A scenario exists where the reference itself is not within the boundaries.
\n * We can say it has \"escaped the boundaries\" — or just \"escaped\".
\n * In this case we need to decide whether the popper should either:\n *\n * - detach from the reference and remain \"trapped\" in the boundaries, or\n * - if it should ignore the boundary and \"escape with its reference\"\n *\n * When `escapeWithReference` is set to`true` and reference is completely\n * outside its boundaries, the popper will overflow (or completely leave)\n * the boundaries in order to remain attached to the edge of the reference.\n *\n * @memberof modifiers\n * @inner\n */\n preventOverflow: {\n /** @prop {number} order=300 - Index used to define the order of execution */\n order: 300,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: preventOverflow,\n /**\n * @prop {Array} [priority=['left','right','top','bottom']]\n * Popper will try to prevent overflow following these priorities by default,\n * then, it could overflow on the left and on top of the `boundariesElement`\n */\n priority: ['left', 'right', 'top', 'bottom'],\n /**\n * @prop {number} padding=5\n * Amount of pixel used to define a minimum distance between the boundaries\n * and the popper. This makes sure the popper always has a little padding\n * between the edges of its container\n */\n padding: 5,\n /**\n * @prop {String|HTMLElement} boundariesElement='scrollParent'\n * Boundaries used by the modifier. Can be `scrollParent`, `window`,\n * `viewport` or any DOM element.\n */\n boundariesElement: 'scrollParent'\n },\n\n /**\n * Modifier used to make sure the reference and its popper stay near each other\n * without leaving any gap between the two. Especially useful when the arrow is\n * enabled and you want to ensure that it points to its reference element.\n * It cares only about the first axis. You can still have poppers with margin\n * between the popper and its reference element.\n * @memberof modifiers\n * @inner\n */\n keepTogether: {\n /** @prop {number} order=400 - Index used to define the order of execution */\n order: 400,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: keepTogether\n },\n\n /**\n * This modifier is used to move the `arrowElement` of the popper to make\n * sure it is positioned between the reference element and its popper element.\n * It will read the outer size of the `arrowElement` node to detect how many\n * pixels of conjunction are needed.\n *\n * It has no effect if no `arrowElement` is provided.\n * @memberof modifiers\n * @inner\n */\n arrow: {\n /** @prop {number} order=500 - Index used to define the order of execution */\n order: 500,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: arrow,\n /** @prop {String|HTMLElement} element='[x-arrow]' - Selector or node used as arrow */\n element: '[x-arrow]'\n },\n\n /**\n * Modifier used to flip the popper's placement when it starts to overlap its\n * reference element.\n *\n * Requires the `preventOverflow` modifier before it in order to work.\n *\n * **NOTE:** this modifier will interrupt the current update cycle and will\n * restart it if it detects the need to flip the placement.\n * @memberof modifiers\n * @inner\n */\n flip: {\n /** @prop {number} order=600 - Index used to define the order of execution */\n order: 600,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: flip,\n /**\n * @prop {String|Array} behavior='flip'\n * The behavior used to change the popper's placement. It can be one of\n * `flip`, `clockwise`, `counterclockwise` or an array with a list of valid\n * placements (with optional variations)\n */\n behavior: 'flip',\n /**\n * @prop {number} padding=5\n * The popper will flip if it hits the edges of the `boundariesElement`\n */\n padding: 5,\n /**\n * @prop {String|HTMLElement} boundariesElement='viewport'\n * The element which will define the boundaries of the popper position.\n * The popper will never be placed outside of the defined boundaries\n * (except if `keepTogether` is enabled)\n */\n boundariesElement: 'viewport',\n /**\n * @prop {Boolean} flipVariations=false\n * The popper will switch placement variation between `-start` and `-end` when\n * the reference element overlaps its boundaries.\n *\n * The original placement should have a set variation.\n */\n flipVariations: false,\n /**\n * @prop {Boolean} flipVariationsByContent=false\n * The popper will switch placement variation between `-start` and `-end` when\n * the popper element overlaps its reference boundaries.\n *\n * The original placement should have a set variation.\n */\n flipVariationsByContent: false\n },\n\n /**\n * Modifier used to make the popper flow toward the inner of the reference element.\n * By default, when this modifier is disabled, the popper will be placed outside\n * the reference element.\n * @memberof modifiers\n * @inner\n */\n inner: {\n /** @prop {number} order=700 - Index used to define the order of execution */\n order: 700,\n /** @prop {Boolean} enabled=false - Whether the modifier is enabled or not */\n enabled: false,\n /** @prop {ModifierFn} */\n fn: inner\n },\n\n /**\n * Modifier used to hide the popper when its reference element is outside of the\n * popper boundaries. It will set a `x-out-of-boundaries` attribute which can\n * be used to hide with a CSS selector the popper when its reference is\n * out of boundaries.\n *\n * Requires the `preventOverflow` modifier before it in order to work.\n * @memberof modifiers\n * @inner\n */\n hide: {\n /** @prop {number} order=800 - Index used to define the order of execution */\n order: 800,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: hide\n },\n\n /**\n * Computes the style that will be applied to the popper element to gets\n * properly positioned.\n *\n * Note that this modifier will not touch the DOM, it just prepares the styles\n * so that `applyStyle` modifier can apply it. This separation is useful\n * in case you need to replace `applyStyle` with a custom implementation.\n *\n * This modifier has `850` as `order` value to maintain backward compatibility\n * with previous versions of Popper.js. Expect the modifiers ordering method\n * to change in future major versions of the library.\n *\n * @memberof modifiers\n * @inner\n */\n computeStyle: {\n /** @prop {number} order=850 - Index used to define the order of execution */\n order: 850,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: computeStyle,\n /**\n * @prop {Boolean} gpuAcceleration=true\n * If true, it uses the CSS 3D transformation to position the popper.\n * Otherwise, it will use the `top` and `left` properties\n */\n gpuAcceleration: true,\n /**\n * @prop {string} [x='bottom']\n * Where to anchor the X axis (`bottom` or `top`). AKA X offset origin.\n * Change this if your popper should grow in a direction different from `bottom`\n */\n x: 'bottom',\n /**\n * @prop {string} [x='left']\n * Where to anchor the Y axis (`left` or `right`). AKA Y offset origin.\n * Change this if your popper should grow in a direction different from `right`\n */\n y: 'right'\n },\n\n /**\n * Applies the computed styles to the popper element.\n *\n * All the DOM manipulations are limited to this modifier. This is useful in case\n * you want to integrate Popper.js inside a framework or view library and you\n * want to delegate all the DOM manipulations to it.\n *\n * Note that if you disable this modifier, you must make sure the popper element\n * has its position set to `absolute` before Popper.js can do its work!\n *\n * Just disable this modifier and define your own to achieve the desired effect.\n *\n * @memberof modifiers\n * @inner\n */\n applyStyle: {\n /** @prop {number} order=900 - Index used to define the order of execution */\n order: 900,\n /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */\n enabled: true,\n /** @prop {ModifierFn} */\n fn: applyStyle,\n /** @prop {Function} */\n onLoad: applyStyleOnLoad,\n /**\n * @deprecated since version 1.10.0, the property moved to `computeStyle` modifier\n * @prop {Boolean} gpuAcceleration=true\n * If true, it uses the CSS 3D transformation to position the popper.\n * Otherwise, it will use the `top` and `left` properties\n */\n gpuAcceleration: undefined\n }\n};\n\n/**\n * The `dataObject` is an object containing all the information used by Popper.js.\n * This object is passed to modifiers and to the `onCreate` and `onUpdate` callbacks.\n * @name dataObject\n * @property {Object} data.instance The Popper.js instance\n * @property {String} data.placement Placement applied to popper\n * @property {String} data.originalPlacement Placement originally defined on init\n * @property {Boolean} data.flipped True if popper has been flipped by flip modifier\n * @property {Boolean} data.hide True if the reference element is out of boundaries, useful to know when to hide the popper\n * @property {HTMLElement} data.arrowElement Node used as arrow by arrow modifier\n * @property {Object} data.styles Any CSS property defined here will be applied to the popper. It expects the JavaScript nomenclature (eg. `marginBottom`)\n * @property {Object} data.arrowStyles Any CSS property defined here will be applied to the popper arrow. It expects the JavaScript nomenclature (eg. `marginBottom`)\n * @property {Object} data.boundaries Offsets of the popper boundaries\n * @property {Object} data.offsets The measurements of popper, reference and arrow elements\n * @property {Object} data.offsets.popper `top`, `left`, `width`, `height` values\n * @property {Object} data.offsets.reference `top`, `left`, `width`, `height` values\n * @property {Object} data.offsets.arrow] `top` and `left` offsets, only one of them will be different from 0\n */\n\n/**\n * Default options provided to Popper.js constructor.
\n * These can be overridden using the `options` argument of Popper.js.
\n * To override an option, simply pass an object with the same\n * structure of the `options` object, as the 3rd argument. For example:\n * ```\n * new Popper(ref, pop, {\n * modifiers: {\n * preventOverflow: { enabled: false }\n * }\n * })\n * ```\n * @type {Object}\n * @static\n * @memberof Popper\n */\nvar Defaults = {\n /**\n * Popper's placement.\n * @prop {Popper.placements} placement='bottom'\n */\n placement: 'bottom',\n\n /**\n * Set this to true if you want popper to position it self in 'fixed' mode\n * @prop {Boolean} positionFixed=false\n */\n positionFixed: false,\n\n /**\n * Whether events (resize, scroll) are initially enabled.\n * @prop {Boolean} eventsEnabled=true\n */\n eventsEnabled: true,\n\n /**\n * Set to true if you want to automatically remove the popper when\n * you call the `destroy` method.\n * @prop {Boolean} removeOnDestroy=false\n */\n removeOnDestroy: false,\n\n /**\n * Callback called when the popper is created.
\n * By default, it is set to no-op.
\n * Access Popper.js instance with `data.instance`.\n * @prop {onCreate}\n */\n onCreate: function onCreate() {},\n\n /**\n * Callback called when the popper is updated. This callback is not called\n * on the initialization/creation of the popper, but only on subsequent\n * updates.
\n * By default, it is set to no-op.
\n * Access Popper.js instance with `data.instance`.\n * @prop {onUpdate}\n */\n onUpdate: function onUpdate() {},\n\n /**\n * List of modifiers used to modify the offsets before they are applied to the popper.\n * They provide most of the functionalities of Popper.js.\n * @prop {modifiers}\n */\n modifiers: modifiers\n};\n\n/**\n * @callback onCreate\n * @param {dataObject} data\n */\n\n/**\n * @callback onUpdate\n * @param {dataObject} data\n */\n\n// Utils\n// Methods\nvar Popper = function () {\n /**\n * Creates a new Popper.js instance.\n * @class Popper\n * @param {Element|referenceObject} reference - The reference element used to position the popper\n * @param {Element} popper - The HTML / XML element used as the popper\n * @param {Object} options - Your custom options to override the ones defined in [Defaults](#defaults)\n * @return {Object} instance - The generated Popper.js instance\n */\n function Popper(reference, popper) {\n var _this = this;\n\n var options = arguments.length > 2 && arguments[2] !== undefined ? arguments[2] : {};\n classCallCheck(this, Popper);\n\n this.scheduleUpdate = function () {\n return requestAnimationFrame(_this.update);\n };\n\n // make update() debounced, so that it only runs at most once-per-tick\n this.update = debounce(this.update.bind(this));\n\n // with {} we create a new object with the options inside it\n this.options = _extends({}, Popper.Defaults, options);\n\n // init state\n this.state = {\n isDestroyed: false,\n isCreated: false,\n scrollParents: []\n };\n\n // get reference and popper elements (allow jQuery wrappers)\n this.reference = reference && reference.jquery ? reference[0] : reference;\n this.popper = popper && popper.jquery ? popper[0] : popper;\n\n // Deep merge modifiers options\n this.options.modifiers = {};\n Object.keys(_extends({}, Popper.Defaults.modifiers, options.modifiers)).forEach(function (name) {\n _this.options.modifiers[name] = _extends({}, Popper.Defaults.modifiers[name] || {}, options.modifiers ? options.modifiers[name] : {});\n });\n\n // Refactoring modifiers' list (Object => Array)\n this.modifiers = Object.keys(this.options.modifiers).map(function (name) {\n return _extends({\n name: name\n }, _this.options.modifiers[name]);\n })\n // sort the modifiers by order\n .sort(function (a, b) {\n return a.order - b.order;\n });\n\n // modifiers have the ability to execute arbitrary code when Popper.js get inited\n // such code is executed in the same order of its modifier\n // they could add new properties to their options configuration\n // BE AWARE: don't add options to `options.modifiers.name` but to `modifierOptions`!\n this.modifiers.forEach(function (modifierOptions) {\n if (modifierOptions.enabled && isFunction(modifierOptions.onLoad)) {\n modifierOptions.onLoad(_this.reference, _this.popper, _this.options, modifierOptions, _this.state);\n }\n });\n\n // fire the first update to position the popper in the right place\n this.update();\n\n var eventsEnabled = this.options.eventsEnabled;\n if (eventsEnabled) {\n // setup event listeners, they will take care of update the position in specific situations\n this.enableEventListeners();\n }\n\n this.state.eventsEnabled = eventsEnabled;\n }\n\n // We can't use class properties because they don't get listed in the\n // class prototype and break stuff like Sinon stubs\n\n\n createClass(Popper, [{\n key: 'update',\n value: function update$$1() {\n return update.call(this);\n }\n }, {\n key: 'destroy',\n value: function destroy$$1() {\n return destroy.call(this);\n }\n }, {\n key: 'enableEventListeners',\n value: function enableEventListeners$$1() {\n return enableEventListeners.call(this);\n }\n }, {\n key: 'disableEventListeners',\n value: function disableEventListeners$$1() {\n return disableEventListeners.call(this);\n }\n\n /**\n * Schedules an update. It will run on the next UI update available.\n * @method scheduleUpdate\n * @memberof Popper\n */\n\n\n /**\n * Collection of utilities useful when writing custom modifiers.\n * Starting from version 1.7, this method is available only if you\n * include `popper-utils.js` before `popper.js`.\n *\n * **DEPRECATION**: This way to access PopperUtils is deprecated\n * and will be removed in v2! Use the PopperUtils module directly instead.\n * Due to the high instability of the methods contained in Utils, we can't\n * guarantee them to follow semver. Use them at your own risk!\n * @static\n * @private\n * @type {Object}\n * @deprecated since version 1.8\n * @member Utils\n * @memberof Popper\n */\n\n }]);\n return Popper;\n}();\n\n/**\n * The `referenceObject` is an object that provides an interface compatible with Popper.js\n * and lets you use it as replacement of a real DOM node.
\n * You can use this method to position a popper relatively to a set of coordinates\n * in case you don't have a DOM node to use as reference.\n *\n * ```\n * new Popper(referenceObject, popperNode);\n * ```\n *\n * NB: This feature isn't supported in Internet Explorer 10.\n * @name referenceObject\n * @property {Function} data.getBoundingClientRect\n * A function that returns a set of coordinates compatible with the native `getBoundingClientRect` method.\n * @property {number} data.clientWidth\n * An ES6 getter that will return the width of the virtual reference element.\n * @property {number} data.clientHeight\n * An ES6 getter that will return the height of the virtual reference element.\n */\n\n\nPopper.Utils = (typeof window !== 'undefined' ? window : global).PopperUtils;\nPopper.placements = placements;\nPopper.Defaults = Defaults;\n\nexport default Popper;\n//# sourceMappingURL=popper.js.map\n","\n /*! \n * portal-vue © Thorsten Lünborg, 2019 \n * \n * Version: 2.1.7\n * \n * LICENCE: MIT \n * \n * https://github.com/linusborg/portal-vue\n * \n */\n\n'use strict';\n\nObject.defineProperty(exports, '__esModule', { value: true });\n\nfunction _interopDefault (ex) { return (ex && (typeof ex === 'object') && 'default' in ex) ? ex['default'] : ex; }\n\nvar Vue = _interopDefault(require('vue'));\n\nfunction _typeof(obj) {\n if (typeof Symbol === \"function\" && typeof Symbol.iterator === \"symbol\") {\n _typeof = function (obj) {\n return typeof obj;\n };\n } else {\n _typeof = function (obj) {\n return obj && typeof Symbol === \"function\" && obj.constructor === Symbol && obj !== Symbol.prototype ? \"symbol\" : typeof obj;\n };\n }\n\n return _typeof(obj);\n}\n\nfunction _toConsumableArray(arr) {\n return _arrayWithoutHoles(arr) || _iterableToArray(arr) || _nonIterableSpread();\n}\n\nfunction _arrayWithoutHoles(arr) {\n if (Array.isArray(arr)) {\n for (var i = 0, arr2 = new Array(arr.length); i < arr.length; i++) arr2[i] = arr[i];\n\n return arr2;\n }\n}\n\nfunction _iterableToArray(iter) {\n if (Symbol.iterator in Object(iter) || Object.prototype.toString.call(iter) === \"[object Arguments]\") return Array.from(iter);\n}\n\nfunction _nonIterableSpread() {\n throw new TypeError(\"Invalid attempt to spread non-iterable instance\");\n}\n\nvar inBrowser = typeof window !== 'undefined';\nfunction freeze(item) {\n if (Array.isArray(item) || _typeof(item) === 'object') {\n return Object.freeze(item);\n }\n\n return item;\n}\nfunction combinePassengers(transports) {\n var slotProps = arguments.length > 1 && arguments[1] !== undefined ? arguments[1] : {};\n return transports.reduce(function (passengers, transport) {\n var temp = transport.passengers[0];\n var newPassengers = typeof temp === 'function' ? temp(slotProps) : transport.passengers;\n return passengers.concat(newPassengers);\n }, []);\n}\nfunction stableSort(array, compareFn) {\n return array.map(function (v, idx) {\n return [idx, v];\n }).sort(function (a, b) {\n return compareFn(a[1], b[1]) || a[0] - b[0];\n }).map(function (c) {\n return c[1];\n });\n}\nfunction pick(obj, keys) {\n return keys.reduce(function (acc, key) {\n if (obj.hasOwnProperty(key)) {\n acc[key] = obj[key];\n }\n\n return acc;\n }, {});\n}\n\nvar transports = {};\nvar targets = {};\nvar sources = {};\nvar Wormhole = Vue.extend({\n data: function data() {\n return {\n transports: transports,\n targets: targets,\n sources: sources,\n trackInstances: inBrowser\n };\n },\n methods: {\n open: function open(transport) {\n if (!inBrowser) return;\n var to = transport.to,\n from = transport.from,\n passengers = transport.passengers,\n _transport$order = transport.order,\n order = _transport$order === void 0 ? Infinity : _transport$order;\n if (!to || !from || !passengers) return;\n var newTransport = {\n to: to,\n from: from,\n passengers: freeze(passengers),\n order: order\n };\n var keys = Object.keys(this.transports);\n\n if (keys.indexOf(to) === -1) {\n Vue.set(this.transports, to, []);\n }\n\n var currentIndex = this.$_getTransportIndex(newTransport); // Copying the array here so that the PortalTarget change event will actually contain two distinct arrays\n\n var newTransports = this.transports[to].slice(0);\n\n if (currentIndex === -1) {\n newTransports.push(newTransport);\n } else {\n newTransports[currentIndex] = newTransport;\n }\n\n this.transports[to] = stableSort(newTransports, function (a, b) {\n return a.order - b.order;\n });\n },\n close: function close(transport) {\n var force = arguments.length > 1 && arguments[1] !== undefined ? arguments[1] : false;\n var to = transport.to,\n from = transport.from;\n if (!to || !from && force === false) return;\n\n if (!this.transports[to]) {\n return;\n }\n\n if (force) {\n this.transports[to] = [];\n } else {\n var index = this.$_getTransportIndex(transport);\n\n if (index >= 0) {\n // Copying the array here so that the PortalTarget change event will actually contain two distinct arrays\n var newTransports = this.transports[to].slice(0);\n newTransports.splice(index, 1);\n this.transports[to] = newTransports;\n }\n }\n },\n registerTarget: function registerTarget(target, vm, force) {\n if (!inBrowser) return;\n\n if (this.trackInstances && !force && this.targets[target]) {\n console.warn(\"[portal-vue]: Target \".concat(target, \" already exists\"));\n }\n\n this.$set(this.targets, target, Object.freeze([vm]));\n },\n unregisterTarget: function unregisterTarget(target) {\n this.$delete(this.targets, target);\n },\n registerSource: function registerSource(source, vm, force) {\n if (!inBrowser) return;\n\n if (this.trackInstances && !force && this.sources[source]) {\n console.warn(\"[portal-vue]: source \".concat(source, \" already exists\"));\n }\n\n this.$set(this.sources, source, Object.freeze([vm]));\n },\n unregisterSource: function unregisterSource(source) {\n this.$delete(this.sources, source);\n },\n hasTarget: function hasTarget(to) {\n return !!(this.targets[to] && this.targets[to][0]);\n },\n hasSource: function hasSource(to) {\n return !!(this.sources[to] && this.sources[to][0]);\n },\n hasContentFor: function hasContentFor(to) {\n return !!this.transports[to] && !!this.transports[to].length;\n },\n // Internal\n $_getTransportIndex: function $_getTransportIndex(_ref) {\n var to = _ref.to,\n from = _ref.from;\n\n for (var i in this.transports[to]) {\n if (this.transports[to][i].from === from) {\n return +i;\n }\n }\n\n return -1;\n }\n }\n});\nvar wormhole = new Wormhole(transports);\n\nvar _id = 1;\nvar Portal = Vue.extend({\n name: 'portal',\n props: {\n disabled: {\n type: Boolean\n },\n name: {\n type: String,\n default: function _default() {\n return String(_id++);\n }\n },\n order: {\n type: Number,\n default: 0\n },\n slim: {\n type: Boolean\n },\n slotProps: {\n type: Object,\n default: function _default() {\n return {};\n }\n },\n tag: {\n type: String,\n default: 'DIV'\n },\n to: {\n type: String,\n default: function _default() {\n return String(Math.round(Math.random() * 10000000));\n }\n }\n },\n created: function created() {\n var _this = this;\n\n this.$nextTick(function () {\n wormhole.registerSource(_this.name, _this);\n });\n },\n mounted: function mounted() {\n if (!this.disabled) {\n this.sendUpdate();\n }\n },\n updated: function updated() {\n if (this.disabled) {\n this.clear();\n } else {\n this.sendUpdate();\n }\n },\n beforeDestroy: function beforeDestroy() {\n wormhole.unregisterSource(this.name);\n this.clear();\n },\n watch: {\n to: function to(newValue, oldValue) {\n oldValue && oldValue !== newValue && this.clear(oldValue);\n this.sendUpdate();\n }\n },\n methods: {\n clear: function clear(target) {\n var closer = {\n from: this.name,\n to: target || this.to\n };\n wormhole.close(closer);\n },\n normalizeSlots: function normalizeSlots() {\n return this.$scopedSlots.default ? [this.$scopedSlots.default] : this.$slots.default;\n },\n normalizeOwnChildren: function normalizeOwnChildren(children) {\n return typeof children === 'function' ? children(this.slotProps) : children;\n },\n sendUpdate: function sendUpdate() {\n var slotContent = this.normalizeSlots();\n\n if (slotContent) {\n var transport = {\n from: this.name,\n to: this.to,\n passengers: _toConsumableArray(slotContent),\n order: this.order\n };\n wormhole.open(transport);\n } else {\n this.clear();\n }\n }\n },\n render: function render(h) {\n var children = this.$slots.default || this.$scopedSlots.default || [];\n var Tag = this.tag;\n\n if (children && this.disabled) {\n return children.length <= 1 && this.slim ? this.normalizeOwnChildren(children)[0] : h(Tag, [this.normalizeOwnChildren(children)]);\n } else {\n return this.slim ? h() : h(Tag, {\n class: {\n 'v-portal': true\n },\n style: {\n display: 'none'\n },\n key: 'v-portal-placeholder'\n });\n }\n }\n});\n\nvar PortalTarget = Vue.extend({\n name: 'portalTarget',\n props: {\n multiple: {\n type: Boolean,\n default: false\n },\n name: {\n type: String,\n required: true\n },\n slim: {\n type: Boolean,\n default: false\n },\n slotProps: {\n type: Object,\n default: function _default() {\n return {};\n }\n },\n tag: {\n type: String,\n default: 'div'\n },\n transition: {\n type: [String, Object, Function]\n }\n },\n data: function data() {\n return {\n transports: wormhole.transports,\n firstRender: true\n };\n },\n created: function created() {\n var _this = this;\n\n this.$nextTick(function () {\n wormhole.registerTarget(_this.name, _this);\n });\n },\n watch: {\n ownTransports: function ownTransports() {\n this.$emit('change', this.children().length > 0);\n },\n name: function name(newVal, oldVal) {\n /**\r\n * TODO\r\n * This should warn as well ...\r\n */\n wormhole.unregisterTarget(oldVal);\n wormhole.registerTarget(newVal, this);\n }\n },\n mounted: function mounted() {\n var _this2 = this;\n\n if (this.transition) {\n this.$nextTick(function () {\n // only when we have a transition, because it causes a re-render\n _this2.firstRender = false;\n });\n }\n },\n beforeDestroy: function beforeDestroy() {\n wormhole.unregisterTarget(this.name);\n },\n computed: {\n ownTransports: function ownTransports() {\n var transports = this.transports[this.name] || [];\n\n if (this.multiple) {\n return transports;\n }\n\n return transports.length === 0 ? [] : [transports[transports.length - 1]];\n },\n passengers: function passengers() {\n return combinePassengers(this.ownTransports, this.slotProps);\n }\n },\n methods: {\n // can't be a computed prop because it has to \"react\" to $slot changes.\n children: function children() {\n return this.passengers.length !== 0 ? this.passengers : this.$scopedSlots.default ? this.$scopedSlots.default(this.slotProps) : this.$slots.default || [];\n },\n // can't be a computed prop because it has to \"react\" to this.children().\n noWrapper: function noWrapper() {\n var noWrapper = this.slim && !this.transition;\n\n if (noWrapper && this.children().length > 1) {\n console.warn('[portal-vue]: PortalTarget with `slim` option received more than one child element.');\n }\n\n return noWrapper;\n }\n },\n render: function render(h) {\n var noWrapper = this.noWrapper();\n var children = this.children();\n var Tag = this.transition || this.tag;\n return noWrapper ? children[0] : this.slim && !Tag ? h() : h(Tag, {\n props: {\n // if we have a transition component, pass the tag if it exists\n tag: this.transition && this.tag ? this.tag : undefined\n },\n class: {\n 'vue-portal-target': true\n }\n }, children);\n }\n});\n\nvar _id$1 = 0;\nvar portalProps = ['disabled', 'name', 'order', 'slim', 'slotProps', 'tag', 'to'];\nvar targetProps = ['multiple', 'transition'];\nvar MountingPortal = Vue.extend({\n name: 'MountingPortal',\n inheritAttrs: false,\n props: {\n append: {\n type: [Boolean, String]\n },\n bail: {\n type: Boolean\n },\n mountTo: {\n type: String,\n required: true\n },\n // Portal\n disabled: {\n type: Boolean\n },\n // name for the portal\n name: {\n type: String,\n default: function _default() {\n return 'mounted_' + String(_id$1++);\n }\n },\n order: {\n type: Number,\n default: 0\n },\n slim: {\n type: Boolean\n },\n slotProps: {\n type: Object,\n default: function _default() {\n return {};\n }\n },\n tag: {\n type: String,\n default: 'DIV'\n },\n // name for the target\n to: {\n type: String,\n default: function _default() {\n return String(Math.round(Math.random() * 10000000));\n }\n },\n // Target\n multiple: {\n type: Boolean,\n default: false\n },\n targetSlim: {\n type: Boolean\n },\n targetSlotProps: {\n type: Object,\n default: function _default() {\n return {};\n }\n },\n targetTag: {\n type: String,\n default: 'div'\n },\n transition: {\n type: [String, Object, Function]\n }\n },\n created: function created() {\n if (typeof document === 'undefined') return;\n var el = document.querySelector(this.mountTo);\n\n if (!el) {\n console.error(\"[portal-vue]: Mount Point '\".concat(this.mountTo, \"' not found in document\"));\n return;\n }\n\n var props = this.$props; // Target already exists\n\n if (wormhole.targets[props.name]) {\n if (props.bail) {\n console.warn(\"[portal-vue]: Target \".concat(props.name, \" is already mounted.\\n Aborting because 'bail: true' is set\"));\n } else {\n this.portalTarget = wormhole.targets[props.name];\n }\n\n return;\n }\n\n var append = props.append;\n\n if (append) {\n var type = typeof append === 'string' ? append : 'DIV';\n var mountEl = document.createElement(type);\n el.appendChild(mountEl);\n el = mountEl;\n } // get props for target from $props\n // we have to rename a few of them\n\n\n var _props = pick(this.$props, targetProps);\n\n _props.slim = this.targetSlim;\n _props.tag = this.targetTag;\n _props.slotProps = this.targetSlotProps;\n _props.name = this.to;\n this.portalTarget = new PortalTarget({\n el: el,\n parent: this.$parent || this,\n propsData: _props\n });\n },\n beforeDestroy: function beforeDestroy() {\n var target = this.portalTarget;\n\n if (this.append) {\n var el = target.$el;\n el.parentNode.removeChild(el);\n }\n\n target.$destroy();\n },\n render: function render(h) {\n if (!this.portalTarget) {\n console.warn(\"[portal-vue] Target wasn't mounted\");\n return h();\n } // if there's no \"manual\" scoped slot, so we create a \n *\n * @return {number}\n * R value to reach the end of the given period\n */\nvar getLiveRValue = function getLiveRValue(attributes, time, duration) {\n var NOW = attributes.NOW,\n clientOffset = attributes.clientOffset,\n availabilityStartTime = attributes.availabilityStartTime,\n _attributes$timescale = attributes.timescale,\n timescale = _attributes$timescale === void 0 ? 1 : _attributes$timescale,\n _attributes$periodSta = attributes.periodStart,\n periodStart = _attributes$periodSta === void 0 ? 0 : _attributes$periodSta,\n _attributes$minimumUp = attributes.minimumUpdatePeriod,\n minimumUpdatePeriod = _attributes$minimumUp === void 0 ? 0 : _attributes$minimumUp;\n var now = (NOW + clientOffset) / 1000;\n var periodStartWC = availabilityStartTime + periodStart;\n var periodEndWC = now + minimumUpdatePeriod;\n var periodDuration = periodEndWC - periodStartWC;\n return Math.ceil((periodDuration * timescale - time) / duration);\n};\n/**\n * Uses information provided by SegmentTemplate.SegmentTimeline to determine segment\n * timing and duration\n *\n * @param {Object} attributes\n * Object containing all inherited attributes from parent elements with attribute\n * names as keys\n * @param {Object[]} segmentTimeline\n * List of objects representing the attributes of each S element contained within\n *\n * @return {{number: number, duration: number, time: number, timeline: number}[]}\n * List of Objects with segment timing and duration info\n */\n\n\nvar parseByTimeline = function parseByTimeline(attributes, segmentTimeline) {\n var type = attributes.type,\n _attributes$minimumUp2 = attributes.minimumUpdatePeriod,\n minimumUpdatePeriod = _attributes$minimumUp2 === void 0 ? 0 : _attributes$minimumUp2,\n _attributes$media = attributes.media,\n media = _attributes$media === void 0 ? '' : _attributes$media,\n sourceDuration = attributes.sourceDuration,\n _attributes$timescale2 = attributes.timescale,\n timescale = _attributes$timescale2 === void 0 ? 1 : _attributes$timescale2,\n _attributes$startNumb = attributes.startNumber,\n startNumber = _attributes$startNumb === void 0 ? 1 : _attributes$startNumb,\n timeline = attributes.periodStart;\n var segments = [];\n var time = -1;\n\n for (var sIndex = 0; sIndex < segmentTimeline.length; sIndex++) {\n var S = segmentTimeline[sIndex];\n var duration = S.d;\n var repeat = S.r || 0;\n var segmentTime = S.t || 0;\n\n if (time < 0) {\n // first segment\n time = segmentTime;\n }\n\n if (segmentTime && segmentTime > time) {\n // discontinuity\n // TODO: How to handle this type of discontinuity\n // timeline++ here would treat it like HLS discontuity and content would\n // get appended without gap\n // E.G.\n // \n // \n // \n // \n // would have $Time$ values of [0, 1, 2, 5]\n // should this be appened at time positions [0, 1, 2, 3],(#EXT-X-DISCONTINUITY)\n // or [0, 1, 2, gap, gap, 5]? (#EXT-X-GAP)\n // does the value of sourceDuration consider this when calculating arbitrary\n // negative @r repeat value?\n // E.G. Same elements as above with this added at the end\n // \n // with a sourceDuration of 10\n // Would the 2 gaps be included in the time duration calculations resulting in\n // 8 segments with $Time$ values of [0, 1, 2, 5, 6, 7, 8, 9] or 10 segments\n // with $Time$ values of [0, 1, 2, 5, 6, 7, 8, 9, 10, 11] ?\n time = segmentTime;\n }\n\n var count = void 0;\n\n if (repeat < 0) {\n var nextS = sIndex + 1;\n\n if (nextS === segmentTimeline.length) {\n // last segment\n if (type === 'dynamic' && minimumUpdatePeriod > 0 && media.indexOf('$Number$') > 0) {\n count = getLiveRValue(attributes, time, duration);\n } else {\n // TODO: This may be incorrect depending on conclusion of TODO above\n count = (sourceDuration * timescale - time) / duration;\n }\n } else {\n count = (segmentTimeline[nextS].t - time) / duration;\n }\n } else {\n count = repeat + 1;\n }\n\n var end = startNumber + segments.length + count;\n var number = startNumber + segments.length;\n\n while (number < end) {\n segments.push({\n number: number,\n duration: duration / timescale,\n time: time,\n timeline: timeline\n });\n time += duration;\n number++;\n }\n }\n\n return segments;\n};\n\nvar identifierPattern = /\\$([A-z]*)(?:(%0)([0-9]+)d)?\\$/g;\n/**\n * Replaces template identifiers with corresponding values. To be used as the callback\n * for String.prototype.replace\n *\n * @name replaceCallback\n * @function\n * @param {string} match\n * Entire match of identifier\n * @param {string} identifier\n * Name of matched identifier\n * @param {string} format\n * Format tag string. Its presence indicates that padding is expected\n * @param {string} width\n * Desired length of the replaced value. Values less than this width shall be left\n * zero padded\n * @return {string}\n * Replacement for the matched identifier\n */\n\n/**\n * Returns a function to be used as a callback for String.prototype.replace to replace\n * template identifiers\n *\n * @param {Obect} values\n * Object containing values that shall be used to replace known identifiers\n * @param {number} values.RepresentationID\n * Value of the Representation@id attribute\n * @param {number} values.Number\n * Number of the corresponding segment\n * @param {number} values.Bandwidth\n * Value of the Representation@bandwidth attribute.\n * @param {number} values.Time\n * Timestamp value of the corresponding segment\n * @return {replaceCallback}\n * Callback to be used with String.prototype.replace to replace identifiers\n */\n\nvar identifierReplacement = function identifierReplacement(values) {\n return function (match, identifier, format, width) {\n if (match === '$$') {\n // escape sequence\n return '$';\n }\n\n if (typeof values[identifier] === 'undefined') {\n return match;\n }\n\n var value = '' + values[identifier];\n\n if (identifier === 'RepresentationID') {\n // Format tag shall not be present with RepresentationID\n return value;\n }\n\n if (!format) {\n width = 1;\n } else {\n width = parseInt(width, 10);\n }\n\n if (value.length >= width) {\n return value;\n }\n\n return \"\" + new Array(width - value.length + 1).join('0') + value;\n };\n};\n/**\n * Constructs a segment url from a template string\n *\n * @param {string} url\n * Template string to construct url from\n * @param {Obect} values\n * Object containing values that shall be used to replace known identifiers\n * @param {number} values.RepresentationID\n * Value of the Representation@id attribute\n * @param {number} values.Number\n * Number of the corresponding segment\n * @param {number} values.Bandwidth\n * Value of the Representation@bandwidth attribute.\n * @param {number} values.Time\n * Timestamp value of the corresponding segment\n * @return {string}\n * Segment url with identifiers replaced\n */\n\nvar constructTemplateUrl = function constructTemplateUrl(url, values) {\n return url.replace(identifierPattern, identifierReplacement(values));\n};\n/**\n * Generates a list of objects containing timing and duration information about each\n * segment needed to generate segment uris and the complete segment object\n *\n * @param {Object} attributes\n * Object containing all inherited attributes from parent elements with attribute\n * names as keys\n * @param {Object[]|undefined} segmentTimeline\n * List of objects representing the attributes of each S element contained within\n * the SegmentTimeline element\n * @return {{number: number, duration: number, time: number, timeline: number}[]}\n * List of Objects with segment timing and duration info\n */\n\nvar parseTemplateInfo = function parseTemplateInfo(attributes, segmentTimeline) {\n if (!attributes.duration && !segmentTimeline) {\n // if neither @duration or SegmentTimeline are present, then there shall be exactly\n // one media segment\n return [{\n number: attributes.startNumber || 1,\n duration: attributes.sourceDuration,\n time: 0,\n timeline: attributes.periodStart\n }];\n }\n\n if (attributes.duration) {\n return parseByDuration(attributes);\n }\n\n return parseByTimeline(attributes, segmentTimeline);\n};\n/**\n * Generates a list of segments using information provided by the SegmentTemplate element\n *\n * @param {Object} attributes\n * Object containing all inherited attributes from parent elements with attribute\n * names as keys\n * @param {Object[]|undefined} segmentTimeline\n * List of objects representing the attributes of each S element contained within\n * the SegmentTimeline element\n * @return {Object[]}\n * List of segment objects\n */\n\nvar segmentsFromTemplate = function segmentsFromTemplate(attributes, segmentTimeline) {\n var templateValues = {\n RepresentationID: attributes.id,\n Bandwidth: attributes.bandwidth || 0\n };\n var _attributes$initializ = attributes.initialization,\n initialization = _attributes$initializ === void 0 ? {\n sourceURL: '',\n range: ''\n } : _attributes$initializ;\n var mapSegment = urlTypeToSegment({\n baseUrl: attributes.baseUrl,\n source: constructTemplateUrl(initialization.sourceURL, templateValues),\n range: initialization.range\n });\n var segments = parseTemplateInfo(attributes, segmentTimeline);\n return segments.map(function (segment) {\n templateValues.Number = segment.number;\n templateValues.Time = segment.time;\n var uri = constructTemplateUrl(attributes.media || '', templateValues); // See DASH spec section 5.3.9.2.2\n // - if timescale isn't present on any level, default to 1.\n\n var timescale = attributes.timescale || 1; // - if presentationTimeOffset isn't present on any level, default to 0\n\n var presentationTimeOffset = attributes.presentationTimeOffset || 0;\n var presentationTime = // Even if the @t attribute is not specified for the segment, segment.time is\n // calculated in mpd-parser prior to this, so it's assumed to be available.\n attributes.periodStart + (segment.time - presentationTimeOffset) / timescale;\n var map = {\n uri: uri,\n timeline: segment.timeline,\n duration: segment.duration,\n resolvedUri: resolveUrl(attributes.baseUrl || '', uri),\n map: mapSegment,\n number: segment.number,\n presentationTime: presentationTime\n };\n return map;\n });\n};\n\n/**\n * Converts a